|
CAMERA
35mm camera
150mm lens attached to bellows
SETUP
A laser trigger was
placed above the rim of the glass to catch the liquid splashing up and
out of the glass. This was easier than trying to hit the laser beam with
the high pressure squirt from a hand held turkey baster. A delay module was used to adjust the delay for the liquid
to peak before triggering an electronic cable release . The glass was sitting on a white
plexiglass surface with a soft-light placed underneath. The gray shading
was added later in Photoshop. I often use long lenses for selective focus
and when working with small objects.
|
