Kapture Group Inc. (800) 879-4955

Next Image

 

Volcano Waterdrop w/smoke

CAMERA
35mm camera
150mm lens attached to a bellows

SETUP
I placed a medium sized soft-light with a red gel attached behind a large black darkroom tray filled with water. Two small soft lights were placed to the sides for fill. A laser trigger was aligned over the top of the water with a turkey baster mounted on a crossbar over the tray to assure the drips would break the beam. A delay module was used to delay the triggersignal long enough for the water drop to form before an electronic cable release tripped the shutter. By blowing smoke right at the water surface small ripples did not allow a perfect drop to form.

Photo by Peat
 

Laser Triggers  Sound Trigger  Electronic Cable Release
Universal Delay  Sync-Go-Round   Home