Kapture Group Inc. (800) 879-4955

Digital Imaging Solutions for all PhaseOne Digital Backs

 

"QUADSTITCH"
Sliding Back Adapter

- 8 framing options with masks -

Check out the QuadStitch sliding back adapter here.

PhaseOne logo

 

 

 


Kapture Group 3 Position Sliding Stitching Back Adapter

Cat# KG-008STI - $1995.00

The Kapture Group 3 position STITCHING Adapter can be mounted to just about any view camera. Interface plates are available for Arca-Swiss, Cambo, Horseman, Sinar, Linhof, Toyo, Rollei Xact 2, Universal Graflok and many others. Most medium format view cameras are also supported. You can shoot single, double or triple captures to increase both file size and field of view at the flick of a switch. Each unit includes the view camera Interface plate and the rotatable drop-in insert for landscape or portrait imaging.

PDF INSTRUCTION MANUAL

The included drop-in interface plate is available in Phase One 645AF/DF, Hasselblad V, Hasselblad H series, Mamiya 645AFD and Contax 645 mount. The drop-in inserts are rotatable and allow landscape or portrait orientation of your digital back. Kapture Group Sliding Back adapters incorporate a bright custom Maxwell Precision Optics focus screen. When ordering please specify your digital back model number so the correct screened mask can be installed.


Cat# - KG-007 - $1695.00

 

"STANDARD" Sliding Back Adapter

The Kapture Group Standard Sliding Back Adapter KG-007 is designed for use with all PhaseOne digital backs. Each unit includes the Interface plate for your view camera and the drop-in insert for your digital back. Interface plates are available for Arca-Swiss, Cambo, Horseman / Sinar, Linhof, Toyo, Rollei, Universal Graflok and many others. Most medium format 679 view cameras are also supported.

The included drop-in interface plate is available in Phase One 645AF/D, Hasselblad, Hasselblad H series, Mamiya 645AFD and Contax 645 mount. The drop-in inserts are rotatable and allow landscape or portrait orientation of your digital back.

The sliding back also accepts Hasselblad V viewfinders and incorporates a custom Maxwell Precision Optics focus screen. When ordering please specify your digital back model number so the correct screened mask can be installed.

Please specify view camera interface and digital back mount when ordering. Example: Phase One P65+ / Hasselblad H Mount or Phase One P45+ / Mamiya 645 AFD Mount or Phase One P 40+ / Hasselblad-V Mount.

 


 

 


Sliding Back Adapter KG-007AST for the Arca Swiss Rm3d

Introducing the Kapture Group Sliding Back KG-007AST configured exclusively for the Arca Swiss Rm3d technical camera. This Sliding Back seamlessly integrates your Arca Swiss Rm3d to our most compact sliding back. A new feature permits the discriminating photographer to fine tune the plane of focus (if needed) precisely to a specific digital back assuring accurate lens focus at infinity. Our included ultra flat Maxwell Precision Optics focus screen is tuned for better overall.

Please note: Also available in our Stitching Back version KG-008STI

The included drop-in digital back inserts are rotatable allowing choice of landscape or portrait mounting of your digital back. The smooth sliding action coupled with the flexibility to use existing Hasselblad-V viewfinders makes for a compact and economical sliding back package for the Arca Swiss Rm3d.

KG-007AST - $1695.00 / Cut Sheet Download

Fuji 680 Rotating Adapter Plate and Fuji 680 OneShot Release
in Phase One 645AF/DF, Hasselblad H, Hasselblad V, Contax 645 and Mamiya 645AFD Mount


 

Cat # KG-004A - $537.00
Cat # PHA-004B - $349.00

Available in Phase One 645AF/DF, Hasselblad V, Hasselblad H, Mamiya 645AFD and Contax 645

The Fuji GX 680 Solution is designed for use with all Phase One 645AF/DF, Hasselblad-V, Mamiya 645 AFD or Contax 645 PhaseOne digital backs and is compatible with the Fuji GX 680 model I, II & III camera bodies.

The Fuji GX 680 Solution is comprised of 2 component:
The replacement rotating adapter plate KG-004A and the Fuji specific OneShot release System PHA-004B. When ordering please specify your digital back model number so the correct masking can be supplied.


The Fuji 680 OneShot PHA-004B is designed to release the Fuji shutter in sync with your digital back without having to first wake-up or 2 shot the digital back. The rotating adapter plate allows the rotation between portrait and landscape orientation without having to detach the digital back from the camera. The Fuji 680 OneShot makes imaging a one step process. The keyboard enabled OneShot may be triggered via software or from the control module located at the camera. A supplied 10 foot extension cable connects to the control module for remote operation.

 

 

 


Fuji GX 680 Stitching Adapter for Landscape and Portrait Stitching

 

The Kapture Group Fuji GX 680 Stitching Adapter KG-FS enables the stitching of 2 images in landscape or portrait orientation. This creates nearly double the file size and field of view. This adapter also rotates 90 degrees allowing for vertical and horizontal stitching providing tremendous flexibility. A center detent for single image capture is also provided. When ordering please specify your digital back model number so the correct masking can be supplied.

Please note: A Fuji GX 680 OneShot PHA-004B for PhaseOne digital backs is required.

Sample shots showing aspect
ratio and file sizes.

2x3 chips

4x4 chips

5x4 chips

 

 

 

Cat # KG-FS - $798.00
Cat # PHA-004B - $349.00

Fuji STITCHING adapter available in Hasselblad V mount only


Top of page

OneShot Cable Release for all Phase One Digital Backs

The OneShot Cable Release PHA-001 is designed for use with technical and standard view cameras along with some non-Hasselblad medium format cameras eliminating the need to pre-release or wake-up the Phase One digital back. Without the OneShot you have to fire your shutter once and then re-cock the shutter a second time and fire again to capture an image. When configured as shown the OneShot cable release operates just like a regular cable release eliminating the need to fire your shutter twice. All OneShot Cable Releases are available with the P/IQ series multi-pin or the older H sub-mini connector. Recommended for Technical and View Camera applications.

Note: Use of the "zero latency" setting on your Phase One P40+, P65+ and IQ series under heavy or live video use causes the backs to consume more power and run warmer. The Kapture Group Oneshot allows you to use "normal latency" to run much cooler with greatly extended battery life between charges.

The only difference between the Standard PHA-001 and the Wide version of the OneShot Cable Release PHA-001W is the length of the cable between the OneShot housing and the P/IQ or H series connector that plugs into your digital back. Typically the wide version which incorporates a 6 inch coil cable is used with technical cameras and the Standard OneShot with its 12 inch coil cable is used for view camera applications with their longer bellows extension. Both are functionally the same.


Wide OneShot Cable Release
PHA-001W - $295.00




Standard OneShot Cable Release
PHA-001 - $295.00



Shown with the P/IQ multi-pin connector

Multi Shot & Long Exposure

 

The Kapture Group Multi Shot & Long Exposure control unit is designed to allow multiple exposures on a single digital capture and allow you to make long exposures for applications such as digital light painting or multi pop flash shots.

This device is available with the P/IQ series multi-pin or the older H sub-mini connector. It provides the wake up signal and controls the duration of the sync signal to the digital back. This permits the user to layer multiple flash or multiple exposures onto a single digital capture.

 

PHA-001MS - $199.00

 


OneShot Cable Release for Sinar DB Auto Aperture Shutter

Cat # PHA-001DB - $195.00

The Kapture Group OneShot Cable Release Adapter allows one shot image capture with your Sinar DB Auto Aperture Shutter. This device is available with the P series multi pin or the older H sub mini connector.

The OneShot Cable Release Adapter is designed to work with your existing Sinar Auto Aperture Shutter, Sinar Auto Aperture sync cord and Sinar Auto Aperture cable release. It is used instead of the standard OneShot Cable Release.

Bronica ETRS interface Adapter Plate



Cat # - KG-ETR $395.00

Shown with OneShot Cable Release

Cat # - PHA-001 - $295.00

Available in Hasselblad-V mount only

The Bronica ETRS is available for all Hasselblad V mount Phase One digital backs. Flash sync is maintained at all shutter speeds. When ordering please specify your digital back model number so the correct masking can be supplied.

The OneShot Cable Release PHA-001 allows you to make a capture without firing the shutter twice.


Live Video Solutions for large and small format view cameras

The first list below is the digital back interface option and the second and third lists are the view camera configuration options.

Kapture Group Live Video view cameras adapters are available in the following digital back configurations.

Hasselblad-V (Universal)
Hasselblad H Series
PhaseOne 645AF/DF
Mamiya 645AFD
Contax 645
Leaf AFi
Sinar Hy6

The 7 digital back interface options above can be configured to fit the view cameras below and it is the view camera option that determines the price.

-------------------------------------------------------

The 8 view camera options below are $495.00 including any digital back interface listed above.

Sinar 4x5
Cambo 2x3
Cambo 4x5
Rollei XAct2
Toyo 4x5
Horseman 4x5
Universal Graflok

-------------------------------------------------------

The 5 view camera options below are $595.00 including any digital back interface listed above.

Linhoff 4x5
Linhoff Super TECHNIKA III 6X9

Arca-Swiss M69
Toyo VX23D
L
inhof 6x9
(M679)
Arca-Swiss 4x5
Sinar P3

Others configuration available by special order

Universal Graflok / Hasselblad H - $495.00

Shown above in Hasselblad-H but is also available in the configurations listed above.


Cat # KG-LV - $495.00 or $595.00
Depending on the view camera
interface plate selected (see chart on left)

Please indicate your desired configuration when ordering.

Examples:

Hasselblad-V/Sinar P3 = $595.00

Contax 645/Toyo 4x5 = $495.00

Mamiya 645AFD/Arca Swiss 4x5 = $595.00

 

Linhoff Super TECHNIKA III / Hasselblad V

Shown above in Hasselblad-V but also available in the configurations listed on the left.

 

Please contact us if you do not see a configuration for your specific needs.

Top of page

© Copyright Kapture Group Inc. 2013 - all rights reserved